THE BELL

There are those who read this news before you.
Subscribe to receive fresh articles.
Email
Name
Surname
How do you want to read The Bell?
No spam

The first and foremost thing you should do when playing on a computer is to make sure that you can use the commands at all. This surprises many, but they are the key to how to teleport in Minecraft. The main thing is to use everything correctly!



Teleportation is not a common command, so it will only work in a few cases. If you play over the Internet, then you must have access to the server. To receive it, you need to agree with the administrator or another moderator - one of them will enter the line “/op VashNik” in the chat window, and you can safely use teleportation. However, if you are playing on a local network, then the game must support cheats. They can be activated by the player who started the multiplayer mode. As for the single-player game, it is enough to enable cheats when creating a world (additional world settings).


Next, we proceed to the teleportation process itself. You need to decide which point you want to move to. Minecraft uses three standard coordinates to determine location (Z - offset to north or south; X - offset to east or west; Y - height relative to the ground). Sea level has coordinates Y:63, but note that your spawn point will not correspond to coordinates "0,0,63" because she often ends up underwater. If you need to know your coordinates in a game, use the F3 key (Fn+F3 on laptops or Macs, or Alt+Fn+F3 on newer Macs). To move, open the chat window with the “T” key.



To teleport to your friend with whom you play on the same server, you can use his game nickname. The main thing is that it does not contain spaces - the command may not be understood by the algorithm.


As mentioned above, to move to a certain place you need its coordinates. If in doubt about the height (Y), you should enter "83" to avoid being underwater after moving. You may have to fall, but this is unlikely to be fatal.



Example: /tp X Y Z (/tp 517 72 -169). Important - Y is always a positive value, and Z and X can vary from -30000000 to 30000000. If necessary, exact coordinates can be replaced with approximate ones. A special icon is responsible for this - the tilde (~). Just put it in front of the coordinate. Example: "/tp 200 ~10 200". In this case, the command will move you 10 units above your original position.


Don't forget that approximate coordinates cannot teleport you outside the world - in this case the game will simply crash. Additionally, be careful - using a tilde can result in a negative Y value.



In addition to moving independently, you can teleport another player if he plays on the same server. To move it to a specific location, use the command "/tp PlayerTarget XYZ or PlayerTarget". To move a player to you, enter "/tp PlayerTarget @P)) into the chat window. If you need to teleport all players to you, type the line "/tp @a @p".

Mobile version of Minecraft

The mobile version is convenient because you don’t need a computer or console to run the game: you can play on your smartphone, whenever and wherever you want. However, such convenience requires a special approach - it is necessary to carry out several operations to activate special commands. The thing is that, unfortunately, the mobile version does not support the teleportation command, so you will have to download an additional plugin to your device.



But keep in mind that this cannot be repeated in a multiplayer game. So, through the Play Market (for Android) we download PocketInvEditor or iMCPEdit through the AppStore (for iOS). If you are going to play on an iPhone or iPad, then you need to make sure that your device is flashed. Otherwise the application will be inactive.


After opening the editor, select the world in which you want to teleport the character. All worlds you have created so far will be saved and displayed upon launch. To move, use the "Move Character" command. As in the computer version, you will be asked to enter coordinates - without this there is nowhere.



You will need to enter three coordinates: east or west offset (X), north or south offset (Z), height (Y). We remind you that sea level corresponds to coordinate Y:63. You should not forget about this so as not to choke after moving. Next, you need to save your new location. Then the next time you start the game, your character will immediately appear in a new location.

Minecraft on consoles

We won’t talk about where it’s more convenient to play - on a computer or a console; everyone will choose for themselves. It’s worth talking about some of the nuances in using certain additional commands. Before starting the game, activate server privileges to be able to teleport. When creating a world, go to the "Advanced Settings" section and select "Server Privileges".



What's good is that additional features will be available to everyone. Unfortunately, this will disable achievements, but you will be able to freely move from one character to another (more on this in the following paragraphs). Use the touchpad on your controller or the Back, Select button to open the list of players while playing. Then select the "Server Settings" button. This will allow you to unlock additional features in the game.


In the console version, only two types of movement are possible: either you teleport the player to you, or you move to him. Select the option that suits you ("Move to player" or "Move to me"). Now all you have to do is select the character you want to move to or who you want to teleport to you. The command will be executed immediately, and you can continue the game in a new location or with a new player.


Conclusion

We told you about all the nuances of such an important issue. We hope the information was also interesting to you. There is definitely no doubt about its usefulness, because every player who reads this article will know how to teleport to Minecraft home, to a friend, and to any other place.


Video

We are waiting for your comments, feel free to write!

The Minecraft game has many features that can only be realized using special commands. Some things work in multiplayer mode and for admin status, and some work in a single player game.
Important! We enter our commands in the chat window (which can be called by pressing “T” or “/”)

The article will:

  • Commands for a single player game in Minecraft.
  • Commands for the admin in Minecraft.
  • Commands for private territory in Minecraft.

Commands for solo play in Minecraft:

me - thanks to it, we display the entered message from a third party. Example: "Player explores a cave."

tell , w - Send a private message to another player (for example, you want other players on the server not to know the content of your message)

kill - kills your character (for example, when you are stuck in textures)

seed - find out where you are located


Commands for admin in Minecraft:

clear [object number] [additional data] - thanks to this command, the inventory of a certain player is cleared (eliminates items or specific ids)

debug - start debug mode or stop debug mode

defaultgamemode - set the default mode for new players

difficulty - Change your difficulty of the game, 0 - peaceful, 1 - easy, 2 - medium, 3 - difficult.

enchant [level] - Enchant an item in your hands (+level specify)

gamemode [target] - sets the desired game mode for the player. Survival (survival, s or 0), Creativity (creative, c or 1), Adventure (adventure, a or 2). the player must be online for the team to function

gamerule [value] - change the basic rules (fill in this way: true or false.)

Rules:

  • doFireTick - if false, fire does not spread
  • doMobLoot - if false, drops stop falling
  • doMobSpawning - when false, mobs stop spawning
  • doTileDrops - if false, when you destroy a block, items do not drop out
  • keepInventory - if true, when you die, you do not lose the contents of your inventory
  • mobGriefing - if false, blocks are not destroyed by mobs

give [quantity] [additional information] - give the player an item

help [page | team] ? [page | command] - see a list of all consoles

publish - open access to the world via local network

say - the color of the message will be pink

spawnpoint [target] [x] [y] [z] - sets the spawn point for the player at certain coordinates (if you did not enter coordinates, the spawn will be from your position where you are)

time set - changes the time of day

time add - adds time to an existing one

toggledownfall - enable or disable precipitation

tp , tp - command to teleport to a player or coordinates

weather - changes the weather

xp - gives the desired player experience

ban [reason] - command to ban a player on the Minecraft server

ban-ip - ban by ip

pardon - unblock after a player is banned

pardon-ip - unblock by ip after ban

banlist - shows a list of all banned players

op - gives the player operator status

deop - selects operator status

kick [reason] - kick a player from the Minecraft server

list - shows a list of players who are online

save-all - saves changes to the server

save-on - makes automatic saving on the server

save-off - disables automatic saving

stop - stop the server

whitelist list - show whitelist

whitelist - add or remove a player to the whitelist (white list)

whitelist - enable or disable whitelist capabilities

Commands for private territory in Minecraft:

/region claim - save the selected region as a region with the desired name

//hpos1 - set 1 point with existing coordinates

//hpos2 - 2nd point

/region addowner - add players to the owners of the region (opportunities of region creators)

/region addmember - add players to region members

/region removeowner - remove players from owners

/region removemember - remove from members

//expand - expand the region in the desired direction

For example: //expand 5 up - expands your selection five cubes up. Acceptable directions: up, down, me.

//contract - reduces your region in the desired direction

For example: //contract 5 up - will reduce the selection by 5 cubes from bottom to top. Acceptable directions: up, down, me.

/region flag - set the flag

Possible flags:

  • pvp - is PvP possible in the region?
  • use - whether the mechanisms can be used
  • chest-access - is it possible to use chests?
  • lava-flow - lava spreading
  • water-flow - spreading of water
  • lighter - is it possible to use a lighter?

Values:

  • allow - enabled
  • deny - disabled
  • none - the same flag as in the non-private zone

We've compiled a list of some useful console commands and cheats for Minecraft that all players will find useful.

Whether you need to copy an existing build, change a game mode, or just cheat, console commands in Minecraft are an important part of the game that we encounter every day. There are many different commands, all of which vary in difficulty, and we've gone over the must-know ones that you can use to troll your friends. Because what would Minecraft be without friendly griefing?

If you're wondering how to enter the Minecraft console commands listed below, all you have to do is press the forward slash (/) key and a small window will appear. Enter the code and press Enter and your command will be activated.

Selectors

Below are selectors, that is, abbreviation codes that save you from having to enter the names of different players. These are worth remembering so you don't have to type in nicknames like "Sniper_Kitty_Bruv_91" every time some idiot joins your game.

  • @p – player closest to you
  • @r – random player
  • @a – all players
  • @e – all objects in the world
  • @s – you

Clone command

/clone

Clones a series of blocks to another location. Very useful if you are building a city and want to copy several buildings to other locations. " " - starting point. " » – end point. AND " " is the location where you want to move the selected blocks.

Example: /clone 100 234 -10 200 100 0 300 200 100

How to change difficulty

/difficulty<сложность>

Changes the difficulty of the game. Replace the last part of the code with one of the following values:

  1. peaceful (peaceful)
  2. easy (easy)
  3. normal
  4. hard (difficult)

Example: /difficulty peaceful

Apply an effect to yourself or another player

/effect<эффект>[seconds] [level]

Places an effect on the player. "[seconds]", "[level]" and "" (hide particles) are optional conditions, so feel free to ignore them unless you want to change the duration, effect strength, and particle visibility. If you want to remove an effect from a player, enter "/effect"<имя игрока>clear".

Example: /effect Gamer water_breathing 30

Enchant an item

/enchant<игрок> [level]

Places an enchantment on an item in the player's hands. Celestial Punishment, Arthropod Scourge, Wit - any enchantment you could pull from a book or enchantment table. Here is a list of enchant IDs.

Example: /enchant Gamer minecraft:smite 1

Changing Experience

/xp<количество>[player]

Gives the player the specified amount of experience points. If you just want to add levels, which is useful for enchanting, try "/xp<количество>L [player].”

Example: /xp 100L Gamer

Changing Game Mode

/gamemode<режим>

Changes the game mode for everyone in the game. Add a player's name to the end of the command to change the mode for that player only. Replace "<режим>» one of the following options:

  • Survival
  • Creative
  • Adventure
  • Spectator

Example: /gamemode Survival

Give out an item or items

/give<игрок> <предмет>[quantity]

Adds an item to the player's inventory. Ideal if you want to start the game with a full set of diamond equipment. But keep in mind that the quantity only works for stackable items. You can't give yourself 100 diamond swords at a time, although that would be great. A complete list of item IDs can be found here.

Example: /give Gamer diamond_sword 1

Help if the command doesn't work

/help [command name]

Gives additional information about any console command. If you are trying to run a command and it is not working as expected, type the above command before the name of the command that is not working and it will tell you more details about how it works.

Example: /help kill

Enable Inventory Saving

/gamerule keepInventory true

Changes the rules of the game so that if you die, you will keep all items in your inventory. Replace "true" with "false" to disable this.

Kill everyone or everything

Kills everyone, including the player. But if you want to kill another player, use "/kill"<игрок>" And to kill certain mobs, type "/kill @e".

Audio playback command

/playsound<звук> <игрок>

Plays a specific audio file. Great if you want to use a command block to play a sound when someone opens a door. Who doesn't love a good doorbell? Take a look at all the audio file names here.

Example: /playsound minecraft:entity.elder_guardian.ambient voice @a

How to view the world seed

Shows the seed for the current world so you can duplicate the world or give the seed to a friend.

Set the spawn point

/setworldspawn

Moves the spawn point to the location where the player is standing. If you don't want to do this, you can also set the spawn point to a given location using "/setworldspawn »

Example: /setworldspawn 100 80 0

Stop time

/gamerule doDaylightCycle false

This command completely stops the day/night cycle, so the world will always have the current time of day. To restart the loop, replace "false" with "true".

Spawn a mob

/summon<имя_сущности>[x] [y] [z]

Summons a mob in a specific location. Remove the part with "[x][y][z]" at the end so the mob will appear right above you. Just remember that if you spawn a Wither, you need to make your feet as quickly as possible.

Example: /summon creeper

Teleportation

/tp [player]

Teleports the player to the specified location. And yes, you can actually teleport a friend high into the sky and laugh as they fly back to earth.

Example: /tp Gamer 100 0 10

Change the in-game time

/time set<значение>

Sets the in-game time. Add one of the following numbers to the end to change the time of day to:

  • 0 – dawn
  • 1000 – morning
  • 6000 – noon
  • 12000 – sunset
  • 18000 – night

Change the weather to something better or worse

/weather

Changes the weather in the game. Those. "/weather thunder" will start a thunderstorm. This is simply necessary for hunting charged creepers. No one will sit and wait for a thunderstorm.

Having played a single-player game of Minecraft, sooner or later the question arises of how to play on a Minecraft server. Undoubtedly, playing this wonderful game is much more interesting in the company of friends, this is why online Minecraft servers are created on which you can play for free.

Online

Minecraft survival on the server

Survival on a Minecraft server is more difficult than in a single-player game; different people play on the servers, with different views and degrees of education. By playing Minecraft online you will have new friends on the server with whom you will be interested in playing via Skype. But there is also the other side of the coin, be prepared for the fact that someone will try to deceive you and deprive you of your home, kill someone or throw you into a trap. And yet, survival in Minecraft on a server is much more interesting than alone.

Minecraft servers without registration

.

I don’t understand why everyone is looking for Minecraft servers without registration, because registration is the protection of your account, and therefore everything you have. Without registration, anyone can just go to the server and take all your stuff. I think the point is that the shkolota is generally lazy and doesn’t want to use his brain, or maybe there’s nothing to use? It’s good that you are not like that and understand that you can’t do it without registration.

How to register on the server

.

I will write all the registration commands on the minecraft server and it will become clear to you that there is nothing complicated here and you can easily register on any server.

/register [password] [repeat password] do not create a password 12345, complicate it with a letter
Otherwise, you will simply be hacked, or rather, they will guess your password and you will lose everything! If you have been hacked, read this.
An example of writing a command: /register R738161 R738161 or like this: /reg R738161 R738161
You are all registered and can start playing.
The next time you log into the server, you just write
/login [password you provided during registration]- authorization on the server after the main registration
An example of writing a command: /login R738161 or like this: /l R738161

Minecraft commands on Steve's World servers

that you must know.

/spawn - teleport to Spawn.
/kit start - get the server starting kit
/kit menu - get the server navigation book [In the book, warps and server news]
/menu - opens the navigation book with the command [the ability to open the book if it is not in the inventory]
/kit food - get free food
/rules - View server rules
/warp – see all server warps
/warp [warp name]– teleports you to this vapru

There are signs on the servers that execute commands for you, just go to the sign you need and right-click on it.

House point in Minecraft

.

After registering, you need to think about housing. Having found a place for your future home, you need to mark the house
How to put a dot at home? It's simple! By writing the /sethome command, the server will remember this location and in the future you can easily teleport at any time
to your home by writing the /home command.
Each time you register /sethome, the house point will change, so if you register it somewhere far from home, you will simply lose your old home. Ok, we figured out how to put a dot at home in Minecraft, let's move on to private meetings.
Having built a house, be sure to private it, privat protects the house from breakdowns and disassembly, from griefers and ordinary players.
Be aware that an unsecured house can be broken by any player passing by and this will not be considered a violation, since the house is not secured, it means it is not someone’s.

Teams for private territory and property

:

There are only commands for privatizing territories and chests, property. Be sure to read in detail
.
//wand - give out a wooden hatchet for marking territory and privacy.
/region claim [region name]- Create a private region.
/region addmember [region name] [player nickname]- Add a resident to the region Nicky can be added through a space if there are a lot of people.
/region addowner [region name] [player nickname]– Add an owner to the region, after which he will be able to manage the region like you

Attention: Be careful when adding players to private, especially owners. An unkind added player can kick you out and you will be left with nothing. There are many such cases on Minecraft servers when gullibility leads to the loss of everything.
The administration does not consider these complaints and does not return lost property, so that you yourself are to blame here.

/region removemember [region name] [player nickname]- Remove a resident from a given region.
/region info [region name]- View information about the region.
/region remove (or delete) [region name]- Delete the region you created.
/cprivate - install security on the door. It is advisable to close the doors immediately, regardless of whether they are wooden or iron.
Enter the command /cprivate into the chat and hit the door as if breaking [LMB], and so on with every door in the house.
/cprivate [Nicknames of friends separated by a space for access to them]- give access to the door
/cmodify [Friend nicknames separated by spaces]- with this command you can give access to your chest, stove, craft.

Attention! By giving access to your chest, you risk losing your things,
The administration is also not responsible for this action and will not return the items to you!

/cpassword [password] - Command to set a password for a chest or door.
/cunlock - open a chest/door using a password.
/cpublic - this command removes the protection on the chest and it becomes available to all players on the server.
/cremove - the same thing will remove protection from the chest

How to teleport to Minecraft

On the Minecraft server, you can teleport to players and accept their requests for teleports.
/call [player nickname] - using this command you send a teleport request to the player whose nickname you specified.
/tpaccept - this command allows the player who sent the request to teleport to you

Attention! This is a double-edged sword. Be careful when sending a teleport request to a player you don’t know, you may simply be thrown into a pit and killed; such traps are very popular on Minecraft servers, although people continue to use them for bans. Don’t send requests to those who write in the chat like - like everyone is giving me diamonds and so on, 90% of the time it’s a trap and they’ll just kill you, it’s also dangerous to accept requests from strangers, maybe he’s a fan of PVP and by accepting it he can also attack you .
You must know and remember this always, The administration will punish the one who lured you into traps, but will not return your things.

On the server you can write hidden messages, personal ones, as they are also called. Having written such a message, only the person to whom it is addressed will see it.
/m [nickname] - message text
You can respond to the last personal message like this: /r [reply to hidden message] or also /m [nickname] message text

Works in Minecraft

There is an economy on Minecraft servers; you must know how to work in Minecraft, earn money and buy various blocks in the store.
visit the store using the command /warp shop
In order to earn money, get a job /jobs
If you want to know in detail, read How to get a job on a Minecraft server
Or by opening the Work on the Server section in the Menu Book
Another way to make money on the server is Mob - Rocking / warp mob, on the mob you not only earn money, but also level up your level.
For every kill of a mob or player, you are awarded money.
How to find out how much money you have? Write; /money
To transfer money to another player, enter the command /pay [player nickname] [amount]
For example; /pay Stiv 1000 you will thereby transfer 1000 game money to Stiv.

Donat Minecraft

Minecraft Steve's World servers provide paid services called donation.
purchased for real money, which is used to promote servers and the site.

All commands available to donators:

Teams to players with |

/kit skin - you get access to a special menu and the ability to transform into any mob
/kit skinplus - the same thing, you get access to a special menu and the ability to turn into any mob

Teams for players with

/Fly - enable flight mode
/Fly - turn off flight mode

Commands on the Minecraft server for players |

/gm 1 - Enable Creative | VIP | Admin
/gm 0 - Turn off Creative | VIP | admin
/hat – Put the block on your head that you are holding in your hands
/eat - satisfy your hunger
/workbench - virtual workbench [craft]
/jump - jump to the block you are looking at
/back - return to the last point of death or stay
/top – the ability to teleport to the topmost block, which is above your head.
For example, for instant teleportation from a cave to the surface

Admin commands in Minecraft

Here are all the server admin commands for Minecraft Steve's World.
Teams |

/invsee [Nickname] - Check the player’s inventory [Prohibited - taking or placing things]
/enderchest [Nick] - Check the player’s ender chest [Prohibited - taking or placing things]
/oi [Nickname] - Check the player’s inventory [Prohibited - taking or placing things]
/oe [Nick] - Check the player’s ender chest [Prohibited - taking or placing things]
/clearinventory [Nick] ; /ci [Nickname] - Clear the selected player’s inventory [only yours]
/give [Nickname] [amount]- Give the player the specified item in N quantity [only to yourself]
/jump - Teleports you to the block you are looking at
/tp [Nick] - Teleport to the player


  • /tp [Nick X] [Nick Y] - Teleport player X to player Y [Prohibited without the consent of both]

  • /tp [Nick X] [Own Nick]- Teleport player X to you [Prohibited without X's consent]

  • /near ; /nearby [radius]- See which players are not far from you. Standard radius - 100
    /more - increase the item you are holding in your hand to a stack
    /weather off - disable rain [Set clear weather, reduces lag and server load]
    /day - turns on the day [you shouldn’t use this command often, everything should go as usual]
    /repair ; /fix - Repair a tool/armor/enchanted item
    /kick [Nickname] [reason]- Kick a player [Must indicate the reason] [Violations - frequent kicking of players | no reason given]
    /tempban [Nickname] [Time]- Temporarily ban a player For operators only.
    /ban [Nickname] [reason]- Ban the player forever [Must indicate the reason] Only for operators.
    /ban-ip [Nickname] - Ban the player’s IP address [The player must be on the server at this time] For operators only.
    /ban-ip - Ban a player's IP [Regardless of whether the player is on the server or not] For operators only.
    /unban [Nickname] - Unban a player For operators only.
    /pardon-ip - Unban this IP address For operators only.
    /mute [Nickname] [Time] - “Close the player’s mouth” [Must indicate time m - minutes]
    /ignore [Nickname] - Ignore the player [you will not see his messages]
    /whois [Nickname] - View information about the player [find out status]
    /seen [Nickname] - View information about the player For Operators and Admins +
    /getpos - View your coordinates
    /balance [Nickname] - Find out the player’s balance
    /balance - Find out your balance
    /balancetop [page_number]- Show the top richest servers

    Not a complete list of commands, some commands may not be available, it all depends on the purchased admin or other service
    Now you know all the Minecraft server commands and playing will become easier and more interesting for you!

  • Updated: December 07, 2019

    Many of the features that are present in the game are achieved only with the help of commands, so we have prepared a list of commands in Minecraft for you. Most of them only work in multiplayer mode and for admins, but some of them are also suitable for single player play. Don't forget that you should enter commands in the chat window, which can be called up with the T or / key.

    Click to go:

    Commands for solo play in Minecraft:

    me<сообщение> - Displays the entered message on behalf of a third party: "Player_name message text." For example: "Player explores a cave."

    tell<игрок> <сообщение>,w<игрок> <сообщение> - Sending a private message to another player. Useful if you want to prevent other players on the server from seeing the contents of the message.

    kill- Allows you to kill your character, useful if you get stuck in textures. After using the command, the message "Ouch. That look like it hurt." is displayed in chat.

    seed- Allows you to find out the grain of the world in which you are located.

    Commands for admin in Minecraft:

    clear<цель>[object number] [additional data]- Clears the specified player's inventory of all items or specific IDs.

    debug - Starts debug mode or stops it.

    defaultgamemode - Allows you to change the default mode for new players on the server.

    difficulty<0|1|2|3> - Changes the difficulty of the game, 0 - peaceful, 1 - easy, 2 - normal, 3 - difficult.

    enchant<цель>[level] - Enchant an item in your hands to the level specified in the command.

    gamemode [target]- Changes the game mode for the specified player. Survival (survival, s or 0), Creativity (creative, c or 1), Adventure (adventure, a or 2). For the command to work, the player must be online.

    gamerule<правило>[meaning] - Allows you to change a few basic rules. The value must be true or false.

    Rules:

    • doFireTick - if false, stops the spread of fire.
    • doMobLoot - if false, mobs do not drop drops.
    • doMobSpawning - if false, prohibits mob spawning.
    • doTileDrops - if false, objects will not drop from destructible blocks.
    • keepInventory - if true, after death the player does not lose the contents of his inventory.
    • mobGriefing - if false, mobs cannot destroy blocks (creeper explosions do not spoil the landscape).
    • commandBlockOutput - if false, the command block does not output anything to the chat when commands are executed.

    give<цель> <номер объекта>[quantity] [additional information]- Gives the player an item specified by block ID.

    help [page | team] ? [page | team] - Lists all available console commands.

    publish- Provides access to the world via a local network.

    say<сообщение> - Shows a pink message to all players.

    spawnpoint [target] [x] [y] [z]- Allows you to set the spawn point for the player at the specified coordinates. If coordinates were not specified, the spawn point will be your current position.

    time set<число|day|night> - Allows you to change the time of day. Time can be specified as a numeric value, where 0 is dawn, 6000 is noon, 12000 is sunset and 18000 is midnight.

    time add<число> - Adds the specified amount of time to the current one.

    toggledownfall- Allows you to enable or disable precipitation.

    tp<цель1> <цель2>,tp<цель> - Makes it possible to teleport a player specified by name to another or to the entered coordinates.

    weather<время> - Allows you to change the weather for a specific time specified in seconds.

    xp<количество> <цель> - Gives the specified amount of experience to a specific player, from 0 to 5000. If L is entered after the number, the specified number of levels will be added. In addition, levels can be lowered, for example -10L will reduce the player's level by 10.

    ban<игрок>[cause]- Allows you to block a player’s access to the server by nickname.

    ban-ip - Allows you to block a player’s access to the server by IP address.

    pardon<никнейм> - Allows you to unblock the specified player from accessing the server.

    pardon-ip - Removes the specified IP address from the blacklist.

    banlist - Allows you to see a list of all players blocked on the server.

    op<цель> - Gives the specified player operator privileges.

    deop<цель> - Removes operator privileges from the player.

    kick<цель>[reason] - Kicks the specified player from the server.

    list- Displays a list of all players online.

    save-all- Forcefully saves all changes to the server.

    save-on Allows the server to make automatic saves.

    save-off- Prevents the server from performing automatic saving.

    stop- Shuts down the server.

    whitelist list- Displays a list of players in the whitelist.

    whitelist <никнейм> - Adds or removes a player to the whitelist.

    whitelist - Enables or disables the use of a whitelist on the server.

    whitelist reload- Reloads the whitelist, that is, updates it in accordance with the white-list.txt file (can be used when white-list.txt is modified manually).

    /region claim<имя региона> - Saves the selected area as a region with the specified name.

    //hpos1- Sets the first point according to your current coordinates.

    //hpos2- Sets a second point according to your current coordinates.

    /region addowner<регион> <ник1> <ник2> - Adds the specified players to the owners of the region. Owners have the same capabilities as the region creator.

    /region addmember<регион> <ник1> <ник2> - Adds the specified players to the members of the region. Participants have limited options.

    /region removeowner<регион> <ник1> <ник2> - Remove the specified players from the region owners.

    /region removemember<регион> <ник1> <ник2> - Remove the specified players from the region's membership.

    //expand<длина> <направление> - Expands the region in a given direction. For example: //expand 5 up - will expand the selection up 5 cubes. Acceptable directions: up, down, me.

    //contract<длина> <направление> - Will reduce the region in a given direction. For example: //contract 5 up - will reduce the selection by 5 cubes from bottom to top. Acceptable directions: up, down, me.

    /region flag<регион> <флаг> <значение> - You can set a flag for a region if you have sufficient access.

    Possible flags:

    • pvp - is PvP allowed in the region?
    • use - is it permissible to use mechanisms, doors
    • chest-access - whether the use of chests is allowed
    • l ava-flow - is lava flowing acceptable?
    • water-flow - is water spreading acceptable?
    • lighter - is it acceptable to use a lighter?

    Values:

    • allow - enabled
    • deny - disabled
    • none - the same flag as not in the private zone

    Commands for the WorldEdit plugin

    Selecting the active area on which we will work using WorldEdit occurs as follows:

    You can simplify actions with regions using .

    //pos1- Sets the block you are standing on as the first coordinate point.

    //pos2- Sets the block you are standing on as the second coordinate point.

    //hpos1- Sets the block you are looking at as the first coordinate point.

    //hpos2- Sets the block you are looking at as the second coordinate point.

    //wand- Gives you a wooden axe, by left-clicking on the block with this ax you will set the first point, and by right-clicking the second.

    //replace - replaces all selected blocks with those specified in the selected region. For example: //replace dirt glass - will replace all dirt with glass in the selected area.

    //overlay - Cover the region with the specified block. For example: //overlay grass - will cover the region with grass.

    //set - Fill the empty area with the specified block. For example: //set 0 - Removes all blocks in the region (fills with air).

    //move - Move blocks in the region by<количество>, V<направлении>and replace the remaining blocks with .

    //walls - Creates walls from<материал>in the selected region.

    //sel- Removes the current selection.

    //sphere - Creates a sphere from , with radius . Raised can be yes or no, if yes, then the center of the sphere will move up by its radius.

    //hsphere - Creates an empty sphere with the specified parameters.

    //cyl - Creates a cylinder from , with radius and height .

    //hcyl - Creates an empty cylinder with the specified parameters.

    //forestgen - Creates a forest area x blocks, with type and density , density ranges from 0 to 100.

    //undo- Cancels the specified number of your actions.

    //redo- Restores the specified number of actions you canceled.

    //sel - Allows you to select the shape of the selected region. cuboid - selects a parallelepiped. extend - same as cuboid, but by setting the second point you extend the region without losing the selection from the already selected one. poly - selects only in the plane. cyl - cylinder. sphere - sphere. ellipsoid - ellipsoid (capsule).

    //desel- Removes selection.

    //contract - Decrease by the specified amount region in the selected direction (north, east, south, west, up, down), if a number is specified - then in the opposite direction.

    //expand - Will increase the region by the specified number of blocks in the specified direction (north, east, south, west, up, down), if the reverse-amount number is specified - then in the opposite direction.

    //inset [-hv] - Narrows the selected region in each direction.

    //outset [-hv] - Expands the selected region in each direction.

    //size- Shows the number of blocks in the selected region.

    //regen- Regenerates the selected region.

    //copy- Copies the contents of the region.

    //cut- Cuts out the contents of the region.

    //paste- Pastes the contents of the copied region.

    //rotate - Rotates the contents of the copied region by the specified number of degrees .

    //flip- Will reflect the region in the buffer in the direction of dir, or in the direction of your view.

    //pumpkins- Creates a pumpkin field with the specified size.

    //hpyramid- Creates an empty pyramid from a block, with size .

    //pyramid - Creates a pyramid from a block with size .

    //drain - Remove water at the specified distance from you .

    //fixwater - Corrects the water level at a specified distance from you .

    //fixlava - Corrects the level of lava at the specified distance from you .

    //snow - Covers the area with snow at the specified distance from you .

    //thaw - Removes snow at a specified distance from you .

    //butcher [-a]- Kills all hostile mobs at a specified distance from you . Using [-a] will also kill friendly mobs.

    // - Gives you a super pickaxe for quickly destroying blocks.

    THE BELL

    There are those who read this news before you.
    Subscribe to receive fresh articles.
    Email
    Name
    Surname
    How do you want to read The Bell?
    No spam